CASTLE FingerPrint Access Control System
Controller General Specifications

• High speed MCU running at 24Mhz
• 512Kbtyte SRAM
• Onboard battery backed Memory and RTC
• 100 Time Sets each with 3 intervals
• 100 Time Zones (9 days per set)
• 30 Holiday dates (2 sets)
• Anti-passback
• Duress Alarm
• Controls up to 2 CAS-FPR1 door reader interface unit (1 door, 1 IN/1 OUT) or
• Control 1 CAS-FPR1(entry) with exit push button(exit)
• Max 640 FingerPrint Memory
• Max 10,000 transactions records (First In First Out Basis)
• 1 Event Triggered Relay Output
• 1 General Purpose Relay Output (Can be triggered manually or by time zone control)
• 4 sensors (can be controlled manually or by time zone control)
• Equipped with 2 x 20 backlit, LCD and 16 keys keypad for programming
• Menu Driven programming
• 3 modes of operation:
  1. PIN only mode4
  2. Fingerprint only mode
  3. Fingerprint + PIN mode
• 3 levels of password:
  1. Master Password
  2. Technician Password
  3. Alarm Control Password
• On board buzzer for audible feedback
• Housed in sturdy metal casing, coasted with epoxy
• Tubular cam lock for locking front casing & emergency lock release (lock for fail safe)
• Connects to CAS-FPR1 using 6 wires RS485
• Can be networked together with other controller under on PC software control using 2 wires RS485 (Total wire span 1 km)
• Can designate one fingerprint as FingerPrint Registration Station and user is not required to go to all the reader to register their fingerprint
• Manages CASTLE-S-SERIES Controllers in one software - Smartguard Pro
• Door lock, door release button and magnetic contact are connect back to controller in order to provide more security against the unauthorise break in on the door reader.